FORK Marzocchi MZ Comp, 100mm travel, preload adjust, steel steerer, elastomer/coil spring

HEADSET 1 1/8" threadless, sealed loose ball, alloy cap

STEM Specialized "Mobius", alloy, 10 degree rise

HANDLEBARS Alloy, 38mm rise, 9 degree sweep

TAPE / GRIPS Specialized Durango double density Kraton

FRONT BRAKE Shimano 475 mechanical disc, 6" rotor

REAR BRAKE Shimano 475 mechanical disc, 6" rotor

BRAKE LEVERS Shimano Alivio

FRONT DERAILLEUR Shimano Acera, 31.8mm clamp, bottom pull

REAR DERAILLEUR Shimano Deore

SHIFT LEVERS Shimano Alivio

CASSETTE Shimano HG-50, 8-speed, 11x32t

CHAIN Shimano IG-31

CRANKSET Truvativ 5-D, alloy, capless bolts

CHAINRINGS 42t AL-7075 x 32t heat-treated Cr-Mo x 22t heat-treated Cr-Mo, replaceable

BOTTOM BRACKET Truvativ, 68x113mm, square taper, sealed cartridge bearing with double crank stops

PEDALS 9/16" alloy platform w/ Cr-Mo spindle

RIMS SUN "DitchWitch" 26"x1.75", double wall, eyeleted

FRONT HUB Joy-Tech, disc, 32 hole, ground race double sealed loose ball w/ alloy QR

REAR HUB Joy-Tech, disc, freehub, 32 hole, ground race double sealed loose ball w/ alloy QR

SPOKES 2.0mm (14g) stainless steel, brass nipples, L262/R264mm front, L264/R262mm rear

FRONT TIRE Specialized Enduro Sport, 26"x2.2", wire bead

REAR TIRE Specialized Enduro Sport, 26"x2.2", wire bead

TUBES Specialized schraeder valve

SADDLE Specialized Body Geometry Sport ATB

SEAT POST Alloy 30.9mmx300/350mm, micro adjust

SEAT BINDER Alloy QR, 36mm I.D.

현제 위에 사양인데 비비와 뒷드레일러가 고장나서 갈려구합니다
ㅡㅡ; 주위에 두군데 정도의 샵에 가봣는데
한군데는 왕창 바가지쒸울려고하고
싼데는 데오레  비비와 데오레 뒷드레일이 6만냥이나하네요 ㅠㅠ

그래서 혼자 함갈려고 하는데 필요한공구와 비비규격이나 크랭크규격

그리고 뒷드레일은 무슨방식으로 구해야되나여^^:;;